The Equation of a Plane Passing Through Three Given Points

by
K. D.  Stroyan
University of Iowa

copyright 1997 by Academic Press, Inc. - All rights reserved.

Special Mathematica Functions used in this NoteBook

We told you not to look.  This horrible stuff sets various defaults and defines some functions needed to draw the geometric side of the lexicon.  Ignore the details here and go on to the lesson.

Off[General::spell];
Off[General::spell1];
Off[ParametricPlot3D::ppcom]
Needs["Graphics`Colors`"]

SetOptions[Graphics,Axes->False,AxesOrigin->{0,0},AspectRatio->Automatic];
SetOptions[Graphics3D,ViewPoint->{5,2,1},Boxed->False,AspectRatio->Automatic];
SetOptions[ParametricPlot3D,ViewPoint->{5,2,1},AspectRatio->Automatic];
SetOptions[Plot3D,ViewPoint->{5,2,1},AspectRatio->Automatic];
SetOptions[ParametricPlot,AspectRatio->Automatic];
SetOptions[Plot,AspectRatio->Automatic];

colorQ[a_]:=(Head[a]===RGBColor);
grayQ[a_]:=(Head[a]===GrayLevel);
thickQ[a_]:=(Head[a]===Thickness);
absthickQ[a_]:=(Head[a]===AbsoluteThickness);
notruleQ[u_] := !(Head[u]===Rule);
ruleQ[u_] := (Head[u]===Rule);

Norm::usage = "Norm[expr] returns the Euclidean length of the
		vector, 'expr'.";

Norm[a_?VectorQ] := Sqrt[a.a];

Angle[a_?VectorQ,b_?VectorQ] := ArcCos[(a.b)/(Norm[a] Norm[b])]

Proj[a_?VectorQ,b_?VectorQ] := ((a.b)/(b.b))b

tol = .5*10^-6;

OrthUp[a_?VectorQ] :=
	Module[{b,c,d,f},
		d = N[a/Norm[a]];
		If[Chop[d[[3]]^2 - 1,tol] == 0, b={1,0,0} ,
		b = {0,0,1} - d[[3]] d; b = b/Norm[b];];
	Return[b]];
	
OrthSet[a_?VectorQ] :=
	Module[{b,c,d},
		d = N[a/Norm[a]];
		If[Chop[d[[1]],tol]==0,b={1,0,0},
			 If[Chop[d[[2]],tol]==0,b={0,1,0},
			  b={-d[[2]],d[[1]],0}]];
			b=b/Norm[b];c = Cross[d,b];
	Return[{b,c/Norm[c],d}]];

				
Rotate[a_?VectorQ,theta_] :=
	Module[{u,v,r},
		u = OrthSet[a];
		v = Transpose[u];
		r = N[{{Cos[theta],-Sin[theta],0},{Sin[theta],Cos[theta],0},{0,0,1}}];
	Return[v.r.u]];

Vector2D[tail_,tip_,opts___]:=
	Module[{ntail,ntip,sopts,Punit,up,arrow},
	ntail = N[tail];
	ntip = N[tip];
	
	sopts = Join[Select[{opts},colorQ],Select[{opts},
				thickQ],Select[{opts},absthickQ],Select[{opts},grayQ]];

If[Chop[ntail.ntail+ntip.ntip,tol] == 0,
			(*too small to plot or not number*)
			Return[Graphics[Point[{0,0}]]];
	,						
If[Chop[(ntip-ntail).(ntip-ntail),tol] == 0,
		Return[Graphics[{Join[sopts,{Line[{ntail,ntip}]}]}]];
	,
	Punit = (.075 Norm[ntip-ntail]/Norm[ntip-ntail]) (ntip-ntail) ;
	up = 0.15 {-Punit[[2]],Punit[[1]]};
	arrow = Line[{ntail,ntip,ntip-Punit+up,ntip,ntip-Punit-up}];
	]];
Return[Graphics[{Join[{AbsoluteThickness[2]},Join[sopts,{arrow}]]}]];
];

Vector3D[tail_,tip_,opts___]:=
	Module[{ntail,ntip,sopts,Punit,up,u2,u3,u4,rotmat,arrow},
	ntail = N[tail];
	ntip = N[tip];
	
	sopts = Join[Select[{opts},colorQ],Select[{opts},
				thickQ],Select[{opts},absthickQ],Select[{opts},grayQ]];

If[Chop[ntail.ntail+ntip.ntip,tol] == 0,
			(*too small to plot or not number*)
			Return[Graphics3D[Point[{0,0,0}]]];					
	,		
If[Chop[(ntip-ntail).(ntip-ntail),tol] == 0,
		Return[Graphics3D[{Join[sopts,{Line[{ntail,ntip}]}]}]];
	,
	Punit = (ntip-ntail);
	rotmat = Rotate[Punit,N[Pi/2]];
	up = OrthUp[Punit];
	Punit = .075 Punit;
	up = .15 Norm[Punit] up;
	u2 = rotmat.up;
	u3 = rotmat.u2;
	u4 = rotmat.u3;
	arrow = Line[{ntail,ntip,
				ntip - Punit + up,ntip,
				ntip - Punit + u2,ntip,
				ntip - Punit + u3,ntip,
				ntip - Punit + u4}];
	]];
Return[Graphics3D[{Join[{AbsoluteThickness[2]},Join[sopts,{arrow}]]}]];
];

aRCtAN[y_,x_] := Module[{v},
	If[ Chop[N[x],tol] == 0 ,If[ N[y] < 0, v = -N[Pi/2], v = N[Pi/2]],
		v = N[ArcTan[y/x]];
		If[ x < 0 && y < 0, v = N[Pi -  v],v]];
	Return[v]];

Arc2D[X_,Y_,opts___] := Graphics[{opts,
		Disk[{0,0},1,{Min[
							aRCtAN[
						N[X[[2]]],N[X[[1]]]
								]
							,
							aRCtAN[
							N[Y[[2]]],N[Y[[1]]]
								]
						]
						,
					Max[
							aRCtAN[
						N[X[[2]]],N[X[[1]]]
								]
							,
							aRCtAN[
							N[Y[[2]]],N[Y[[1]]]
								]
						]}
				]}
				];
Arc3D[X_,Y_] := 
	Module[{t,U,V},
		U[V_]:= N[(1/Sqrt[V.V]) V];
		Return[Graphics3D[
		Polygon[Append[Table[U[t X + (1-t) Y],{t,0,1,0.1}],{0,0,0}]]
				]
		]
	];

(*Zero Arrow causes trouble. Put in Vector?*)

Vector[tail_,tip_,opts___]:=
	If[Length[N[tail]]==2,Return[Vector2D[tail,tip,opts]],
		Return[Vector3D[tail,tip,opts]]];
		
Arrow[vec_,opts___]:= 
	Module[{a,b},
				If[Length[N[vec]]==2,
				a=ToExpression["Tail"]/.Select[{opts},ruleQ]/.
					{ToExpression["Tail"]->{0,0}};
				Return[Vector2D[a,a+vec,opts]],
				a=ToExpression["Tail"]/.Select[{opts},ruleQ]/.
					{ToExpression["Tail"]->{0,0,0}};
				Return[Vector3D[a,a+vec,opts]]]
				];

Frame2D[delta_] := 
      Graphics[{
            {Green,Line[{{-delta/4,0},{delta,0}}]},
                    Text["x",{1.01 delta,0}],
            {Green,Line[{{0,-delta/4},{0,delta}}]},
                    Text["y",{0, 1.01 delta}]}];

Frame3D[delta_] := 
      Graphics3D[{
            {Green,Line[{{-delta/4,0,0},{delta,0,0}}]},
                    Text["x",{1.01 delta,0,0}],
            {Green,Line[{{0,-delta/4,0},{0,delta,0}}]},
                    Text["y",{0, 1.01 delta,0}],
            {Green,Line[{{0,0,-delta/4},{0,0,delta}}]},
                    Text["z",{0,0,1.01 delta}]}];

View2D[stuff_,opns___] := Show[stuff,Frame2D[1],opns];
View3D[stuff_,opns___] := Show[stuff,Frame3D[1],opns];

Notebook Overview

References to the Text

This NoteBook goes with Problem 17.2 on finding the plane passing through three given points.

Three Points Determine a Plane

\(F = {\(-1\), 1.5, 1}; 
G = {\(- .5\), \(- .5\), 1.3}; 

    H = { .6, 1.2,  .6}; 

    View3D[{Arrow[F, Red], Graphics3D[Text["F", 1.1\ F]], Arrow[G, Red], 
        
\ \ \ \ Graphics3D[Text["G", 1.1\ G]], Arrow[H, Red], 
        Graphics3D[Text["H", 1.1\ H]], 
\ \ \ \ 
        Graphics3D[Polygon[{F, G, H}]]}]; \)

\(\(View3D[{Arrow[F, Blue], Graphics3D[Text["F", 1.1\ F]], 
        Arrow[G, Blue], 
\ \ \ \ Graphics3D[Text["G", 1.1\ G]], 
        Arrow[G - F, Blue], 
\ \ \ \ 
        Graphics3D[Text["G-F",  .5\ \((G - F)\)]], 
        Arrow[G - F, Tail -> F, Red], 
\ \ \ \ 
        Graphics3D[Text["G-F", 1.1\ F +  .5\ \((G - F)\)]], 
        Arrow[H, Blue], 
\ \ \ \ Graphics3D[Text["H", 1.1\ H -  .1\ G]], 
        Arrow[H - F, Blue], 
\ \ \ \ 
        Graphics3D[Text["H-F",  .5\ \((H - F)\)]], 
        Arrow[H - F, Tail -> F, Red], 
\ \ \ \ 
        Graphics3D[Text["H-F", 1.2\ H -  .4\ \((H - F)\)]]}]; \)\)

\(P = \((G - F)\)\[Cross]\((H - F)\); 

    View3D[{Arrow[P, Blue], Graphics3D[Text["P=(G-F)x(H-F)", 1.1\ P]], 

        \ \ \ \ Arrow[P, Tail -> F, Red], Arrow[F, Blue], 
        Arrow[G, Blue], Arrow[G - F, Blue], 
\ \ \ \ 
        Graphics3D[Text["G-F", 1.1\ \((G - F)\)]], 
        Arrow[G - F, Tail -> F, Red], 
\ \ \ \ Arrow[H, Blue], 
        Arrow[H - F, Blue], Graphics3D[Text["H-F", 1.1\ \((H - F)\)]], 

        \ \ \ \ Arrow[H - F, Tail -> F, Red], 
        Graphics3D[Polygon[{F, G, H}]]}]; \)

Exercises

Problem 17.2: Three Ponts Determine a Plane

a

Given the three points

F = {3,0,0}, G = {0,2,0}, H = {0,0,1}

Plot these vectors on a single set of axes.

b

Compute the position vectors parallel to the vector dispalcements:

J  from  F to G

K from F to H

Add these to your plot.

c

Compute a vector V  perpendicular to both  J and K and add this to your plot.

d

Calculate V.F, V.G, V.H.  Observe from your plot that  F, G, H are NOT perpendicular to  V.

e

The equation V.(X-F) = 0  in the unknown vector  X = {x,y,z}, says  "The displacement from  F  to  X  is ____."

f

Explain the similarity between the simplified equations:

V.(X-F) = 0

V.(X-G) = 0

V.(X-H) = 0

when they are written out in components and simplified. (Do this before you explain.)