%% Some of these commands are described at
%% http://knotplot.com/man/
%% type <complink4.txt in KnotPlot Command Window to execute
%% this script.  Note the file complink3.kps must be in the same
%% folder as a knotplot shortcut.

%% Some of these commands are described at 
%% http://knotplot.com/man/
%% type <complink.txt in KnotPlot Command Window to execute 
%% this script.

data open linknums.csv     %% opens linknums.csv to receive data

data format "/f, /L"       %% sets the data format to "/f, /L"
                           %% The data format tells KnotPlot
                           %% what quantities to write to the
                           %% data file.  /f = last file loaded
                           %% /L = linking number.  Thus for the
                           %% last file loaded, the data to be                 
                           %% generated should be of the format                    
                           %% used for linking number.  
       
data header                %% outputs the column titles 
                           %% according to the format /L

%% The following frame commands sets the following commands
%% "knot number %d:  sets command to enter knot number %d 
%% lnknum:  knotplot command for calculating linking number
%% data: data into the opened data file(in this case linknums.csv)
%% revb 0 reverses the orientation of component 0.

frame command "knot number %d; lnknum; data; revb 0; lnknum; data"   

frame 251 to 342           %% The frame command for knots 	
                           %% numbered 251 - 342 will be   
                           %% implemented.
                           %% I.e., %d = 251 - 342

data close    %% closes the data file(in this case linknums.csv)  




%% use revb %d to reverse the orientation of component %d